Guide Specification – 3-Phase Static Uninterruptible Power Supply
UPS module accepts remote switches to initiate the following remote operations. These
contacts shall be field supplied):
Contact rating:
The contact signal inputs and outputs shall be wired to a terminal block located inside the
UPS.
6
MECHANICAL DESIGN
6.1 UPS Enclosure
The UPS shall be a freestanding NEMA1 enclosure equipped with a leveling channel base. The
enclosure shall include provisions for hoisting, jacking, and forklift handling.
6.2 Cable Access
Cable access to the UPS shall be
Bottom entry
Side entry when using optional side cabinet
Top entry when using optional side cabinet
7
WARRANTY
7.1 UPS Warranty
The UPS shall come with a 36-month warranty on all mechanical, electrical,
components. Parts, labor, and travel are included during warranty period. Optional extended
warranties shall be available.
7.2 UPS Battery Warranty
The back-up batteries shall come with a ten-year warranty: three years full, then prorated over the
remaining seven years.. Parts, labor, and travel are included during warranty period. Optional
extended warranties shall be available. See Toshiba warranties at www.toshiba.com/ind
7.3 Warranty Support Availability
Warranty and technical support shall be available 24/7/365. (877-867-8773)
8
BATTERY CABINETS (OPTION)
The UPS manufacturer can provide optional matching battery cabinets with DC breaker.
14
Remote Start
Remote Stop
Battery Temperature High
Power Demand
Remote Emergency Power Off (EPO)
Input: 24 VDC
tronic
elec
March 2009