Specifications / Before Assembly - Bowflex BXT216 Assembly & Owners Manual

Specifications / Before Assembly

Maximum User Weight:
Maximum Inclined Deck Height:
Machine Weight:
Power Requirements:
Operational Voltage:
Operating Current:
Heart Rate Chest Strap:
Complies with the following:
• UL1647 Ed. 6 Standard for Safety: Motor-Operated Massage and Exercise Equipment
• CSA 22.2 No. 68-09 Motor-Operated appliances (household and commercial)
Connectivity:
This product, its packaging, and components contain chemicals
known to the State of California to cause cancer, birth defects, or
reproductive harm. This Notice is provided in accordance with
California's Proposition 65. If you would like additional information,
please refer to our web site at www.nautilus.com/prop65.
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow
a minimum workout area of 86.5" x 163.5" (218.7 cm x 415.3 cm). Be sure that the workout space you are utilizing has adequate height clearance,
taking into consideration the height of the user and the maximum incline of the machine.
Basic Assembly
Follow these basic points when you assemble your machine:
• Read and understand the "Important Safety Instructions" before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless
instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
• The assembly requires 2 people.
• Do not use any power tools for assembly.
Note: This fitness machine is designed to plug into a grounded, non-GFI/non-AFCI outlet only. To determine if your outlet or circuit breaker
is GFI/AFCI, look for a test and reset button on them. If they have the test and reset button, it is a GFI/AFCI outlet or circuit breaker.
Machine Mat
The Bowflex™ Machine Mat is an optional accessory that helps keep your workout area clear and adds a layer of protection to your floor. The rubber
machine mat provides a non-slip, rubber surface which limits static discharge and reduces the possibility of display errors. If possible, put your
Bowflex™ Machine Mat in your selected workout area before you begin assembly.
To order the optional machine mat, go to: www.bowflex.com, or call 1 (800) 605–3369.
400 lbs (181.4 kgs)
16 inches (40.6 cm)
304 lbs (137.9 kg)
120V AC @60Hz
15 A
1 CR2032 battery
8
Assembly / Owner's Manual
54.7"
(139 cm)
84.5"
(214.6 cm)
67"
(170.2 cm)
38.5"
(97.8 cm)