Maintenance - Bowflex BXT216 Assembly & Owners Manual

Maintenance

Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do the necessary tasks.
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular maintenance is
done. Worn or damaged components must be repaired or replaced immediately. Only manufacturer supplied components can be
used to maintain and repair the equipment.
If at any time the Warning labels become loose, unreadable or dislodged, contact Nautilus Customer Service for replacement labels.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the
wall outlet and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power cord in a secure
location.
Daily: Before each use, examine the exercise machine for loose, broken, damaged, or worn parts. Do
not use if found in this condition. Repair or replace all parts at the first sign of wear or damage,
except for the Walking Deck. The Walking Deck is designed for wear on both sides of it. If only
one side of the Walking Deck is worn, a replacement Deck is not required. It is recommended
that a qualified service technician is used to flip the Walking Deck. After each workout, use a
damp cloth to wipe your machine and Console free of moisture.
Note: Avoid excessive moisture on the Console.
Weekly: Check for smooth roller operation. Wipe the machine to remove dust, dirt, or grime.
Note: Do not use petroleum based products.
Monthly Make sure all bolts and screws are tight. Tighten as necessary.
or after 20 hours:
Quarterly: Or after 25 hours—Lubricate the walking belt with a 100% pure silicone lubricant.
Note: Do not use petroleum based products.
Cleaning
To reduce the risk of electrical shock, always unplug the power cord and wait 5 minutes before cleaning, maintaining or
repairing this machine.
Wipe the treadmill down after each use to keep the treadmill clean and dry. It may be necessary to use a mild dish soap at times to remove all dirt
and salt from the belt, painted parts and the display.
NOTICE: If necessary, only use a mild dish soap with a soft cloth to clean the Console. Do not clean with a petroleum based solvent,
automotive cleaner, or any product that contains ammonia. Do not clean the Console in direct sunlight or at high temperatures.
Do not apply too much moisture to the Console.
Do not remove the Motor Control Board (MCB) Cover, as dangerous voltages and
moving parts are present. The components are serviceable only by approved
service personnel or by following service procedures supplied by Nautilus, Inc.
Silicone lubricant is not intended for human consumption. Keep out of reach of
children. Store in a safe place.
Assembly / Owner's Manual
50