Execution Condition Of Online Module Change - Mitsubishi Electric Q64AD2DA User Manual

10
ONLINE MODULE CHANGE
10.1

Execution Condition of Online Module Change

To change a module online, the following CPU module, MELSECNET/H remote I/O
module, Q64AD2DA, GX Developer, and base unit are required.
(1) CPU module
(2) MELSECNET/H remote I/O module
(3) GX Developer
(4) Base unit
Remark
The Process CPU or Redundant CPU are required.
For precautions for redundant system configuration, refer to the QnPRHCPU User's
Manual (Redundant System).
Use the module of function version D or later.
Use GX Developer Version 7.10L or later.
Use GX Developer Version 8.18U or later to change a module on the remote I/O
station online.
(a) When the slim type main base unit (Q3
changed online.
(b) When the extension base unit (type requiring no power supply module (Q5
is used, modules on the base units connected to the extension base unit cannot
be changed online.
The online module change is supported by the Q64AD2DA of the first product to
the function version C.
10.1 Execution Condition of Online Module Change
SB) is used, a module cannot be
9
10
11
B))
10
- 2