Installing And Uninstalling The Utility Package; Precautions For Use - Mitsubishi Electric Q64AD2DA User Manual

8
UTILITY PACKAGE (GX Configurator-AD/GX
Configurator-DA)
8.2

Installing and Uninstalling the Utility Package

For how to install or uninstall the utility package, refer to "Method of installing the
MELSOFT Series" included in the utility package.
8.2.1

Precautions for use

This section provides precautions for using GX Configurator-AD and GX Configurator-
*1
DA.
(1) For safety use
Read "Safety Precautions" and the basic operations described in the GX Developer
Operating Manual since GX Configurator-AD and GX Configurator-DA are add-in
software for GX Developer.
(2) Installation
GX Configurator-AD and GX Configurator-DA are add-in software for GX Developer
Version 4 or later.
Therefore, install GX Configurator-AD or GX Configurator-DA on the personal
computer on which GX Developer Version 4 or later has been installed.
(3) Display error when using Intelligent function module utility
Due to insufficient system resource, the screen may not be normally displayed while
Intelligent function module utility is used.
In this case, exit Intelligent function module utility, GX Developer (such as a program
and comments), and other applications, and then start GX Developer and Intelligent
function module utility.
(4) Starting Intelligent function module utility
(a) Select "QCPU (Q mode)" in "PLC series" of GX Developer and set a project.
(b) Multiple Intelligent function module utilities can be started.
* 1 Using either of the utilities can check the parameter settings of intelligent function module, setting
status, and operating status of A/D and D/A conversions.
They can also be checked when both GX Configurator-AD and GX Configurator-DA have been
installed.
If not, Intelligent function module utility does not start.
However, only one Intelligent function module utility can operate [Open
parameters] and [Save parameters] in the intelligent function module parameter.
The other utilities can operate [Monitor/test] only.
8.2 Installing and Uninstalling the Utility Package
8.2.1 Precautions for use
1
2
3
4
5
6
7
8
8
- 2