Mitsubishi Electric Q64AD2DA User Manual page 161

8
UTILITY PACKAGE (GX Configurator-AD/GX
Configurator-DA)
POINT
The initial setting/auto refresh setting of the intelligent function module can be
configured by either of the following methods.
(1) Set an intelligent function module parameter (initial setting/auto refresh
setting) and write it to the CPU module.
(2) Create an FB of the intelligent function module parameter (initial setting/auto
refresh setting) and paste it to the sequence program.
According to the system specifications, configure the initial setting/auto refresh
setting of the intelligent function module by either of the above methods.
* 1 The following explains when both (1) and (2) settings are configured.
(a) Initial setting
Setting of (2) will be valid.
(b) Auto refresh setting
Both (1) and (2) settings will be valid.
Auto refresh is performed at execution of an FB and END processing of the sequence
program.
*1
8
8.8 Usage of FB
8.8.1 Overview
1
2
3
4
5
6
7
8
- 24