Ch1 Logging Data Storage Area (Un\G5000 To Un\G14999) - Mitsubishi Electric Q64AD2DA User Manual

6
BUFFER MEMORY
6.41

CH1 Logging Data Storage Area (Un\G5000 to Un\G14999)

Logged data can be checked by using the logging facility. (Refer to Section 4.2.7 (4).)
For information on the buffer memory for CH2 or later, refer to Section 6.1 (5).
(a) Even if CH1 Logging data storage area (Un\G5000 to Un\G14999) becomes full,
(b) If CH1 Logging hold request (Y1) is set to off while CH1 Logging hold flag (X1) is
POINT
the data will be written over from the start area for logging data.
set to on, data logging will restart.
However, the logged data will not be cleared.
Setting Operating condition setting request (Y9) to on clears the logging data of all
the channels.
6.41 CH1 Logging Data Storage Area (Un\G5000 to Un\G14999)
1
2
3
4
5
6
7
8
6
- 38