Characteristics - Panasonic KX-NS700 Installation Manual

2.3.2 Characteristics

2.3.2 Characteristics
KX-NS700
Terminal Equipment Loop Limit
Minimum Leakage Resistance
Maximum Number of Extension
Instruments per Line
Ring Voltage
Central Office Loop Limit
Hookswitch Flash Timing Range
Door Opener Current Limit
External Sensor Current Limit
Paging Terminal Impedance
MOH (Music on Hold) Terminal
Impedance
KX-NS720
Terminal Equipment Loop Limit
Minimum Leakage Resistance
Maximum Number of Extension
Instruments per Line
Ring Voltage
Central Office Loop Limit
Hookswitch Flash Timing Range
Door Opener Current Limit
External Sensor Current Limit
Paging Terminal Impedance
MOH (Music on Hold) Terminal
Impedance
38 Installation Manual
• SLT: 600 W including set
Doorphone: 20 W
•
15 000 W minimum
1 for SLT
75 Vrms at 20 Hz/25 Hz depending on the Ringing Load
1600 W maximum
24 ms to 2032 ms
24 V DC/30 V AC, 1 A maximum
Power to the external sensor is provided from the DPH2 card and must
be grounded through the DPH2 card. For the connection diagram,
refer to "4.7.1 DPH2 Card (KX-NS5162)". The PBX detects input from
the sensor when the signal is under 100 W.
600 W
10 000 W
• SLT: 600 W including set
• Doorphone: 20 W
15 000 W minimum
1 for SLT
75 Vrms at 20 Hz/25 Hz depending on the Ringing Load
1600 W maximum
24 ms to 2032 ms
24 V DC/30 V AC, 1 A maximum
Power to the external sensor is provided from the DPH2 card and must
be grounded through the DPH2 card. For the connection diagram,
refer to "4.7.1 DPH2 Card (KX-NS5162)". The PBX detects input from
the sensor when the signal is under 100 W.
600 W
10 000 W
Document Version 2016-03