Panasonic KX-NS700 Installation Manual page 88

Hybrid ip-pbx
Hide thumbs Also See for KX-NS700:
Table of Contents

Advertisement

4.2.5 Installing/Removing the Optional Service Cards
3.
Insert the spacers into the holes on the card, and tighten the spacers to secure the card.
Note
When using an MCSLC8 or MCSLC16 card with a DLC16 card, install the DLC16 card in the bottom
slot.
4.
Connect cables to appropriate ports of the card. For details about pin assignments, refer to the appropriate
section in "4.5 Physical CO Line and Extension Cards".
Note
Make sure to connect cables after installing the card in the PBX, not before.
88
Installation Manual
Spacer
Document Version 2016-03

Advertisement

Table of Contents
loading

Table of Contents