5.2 PC Connection
Note
For details about connecting a switching hub to the PBX, refer to "4.11.1 LAN Connection for the Main
Unit".
Connection via Internet
PC
Router
CAUTION
It is strongly recommended to use TLS encrypted communication when the PC is accessing the PBX via
the Internet. To use TLS encryption, routers must have a port set up for https communication.
Notice
To access the PBX via the internet, routers must have static NAT/NAPT settings (Port forwarding) enabled.
Note
For details about connecting a switching hub to the PBX, refer to "4.11.1 LAN Connection for the Main
Unit".
Connection via RMT Card (KX-TDA0196)
Analog MODEM
PC
To connect a PC to the Main Unit
1.
Start Off-line WebMC launcher.
2.
Click the Connect-Online Mode(C) button.
3.
Select Modem tab.
4.
Set following.
–
Dial Number
–
Dial Type
–
Port
156
Installation Manual
Internet
LAN
LAN Port
Router
Analog Line
Network
Switching Hub
RMT Card (KX-TDA0196) is Installed
in KX-NS700.
Document Version 2016-03