Panasonic KX-NS700 Installation Manual page 161

3.
Continue Offline Programming (Open - Offline Mode)
*1 The PBX's system data file
•
KX-NCP500/KX-NCP1000: DBSYS
•
KX-TDE100/KX-TDE200: DMSYS
*2 The software version for KX-NCP500/KX-NCP1000 or KX-TDE100/KX-TDE200 must meet the latest version requirements shown in
the Data Converter tool. If the requirements are not met, you must use the Maintenance Console to upgrade the version to the latest
version, and then save the DBSYS or DMSYS file.
Notice
•
The following numbering plan settings are brought over during data conversion:
Feature Numbers, Other PBX Number, Extension Number, Quick Dial Number
•
PBX voice data (e.g., SVM, OGM) is not converted.
•
Data conversion for a SLC/LCOT card in the KX-NS700 is not supported; the number of ports in these
cards is too small.
•
The following data is not supported by the data conversion.
Time Mode
Current time mode
Time mode switching time (manual mode)
Wired/Wireless extensions
Timed Reminder
Station Lock
Remote Station Lock
Extension Call Charge Total
Not Ready/Ready (Wrap-up)
LCS On/Off
Room Status (Check In/Check out/Not Ready/
Cleaned Up)
Auto Answer
Absent Message Status
Saved Number Redial
ICD Group Login Status (Login/Logout)
Message Waiting
Incoming Log
Outgoing Log
TAM Log
Personal Absent Message
Document Version 2016-03
Unsupported Item
5.3 Starting Web Maintenance Console
Default Setting
Location setting default
Not Stored
Not set
Unlocked
Unlocked
Total cleared
Wrap-up status cleared
Location setting default
Location setting default
Location setting default
Not set
Number cleared
Location setting default
Canceled
Cleared
Cleared
Cleared
Message cleared
Installation Manual 161