Panasonic KX-NS700 Installation Manual page 170

5.4.1 Easy Setup Wizard
Extension Number
Floating Extension Number
UM Group
DISA (1–64)
Simplified Voice Message (SVM)
Analog Remote Maintenance
TAFAS (Pager)
ICD Group (1–64)
ISDN Remote Maintenance
UM Channel (1–2)
4.
In the Manager/Operator settings:
a.
Select an extension number for the manager from the drop-down list.
b.
Select an extension number for the operator from the drop-down list.
c.
Click Next.
5.
In the Trunk settings:
a.
In CO Dialing Mode , select the appropriate option.
b.
Select an option for Incoming Call Distribution Group. You can select "Yes" or "No". Refer to the
information on this screen for details.
c.
Click Next.
6.
In the LAN settings:
The IP addresses for the PBX, DNS server, and DSP card can be assigned automatically through a DHCP
server or entered manually.
When using a DHCP server:
a.
Select Obtain an IP address automatically.
b.
Select Obtain DNS server address automatically.
c.
Select Obtain DSP IP address automatically.
Notice
The boxes will turn grey and the IP address information will be assigned automatically.
Write down the address information assigned to the PBX for future reference.
d.
Click Next.
When not using a DHCP server:
a.
Select Use the following IP address.
b.
Enter an IP address
gateway, depending on your network configuration.)
c.
Select Use the following DNS server address.
d.
Enter the preferred and alternative DNS IP addresses
170 Installation Manual
3 digits
Extension
Number
101–xxx
or
201–xxx
500
501–564
591
599
600
601–664
699
592, 593
, subnet mask , and default gateway
*1 *2
4 digits
Extension
Number
1001–xxxx
or
2001–xxxx
5000
5001–5064
5091
5099
6000
6001–6064
6099
5092, 5093
. (You may not need to specify the default
*1
.
*1
Document Version 2016-03