Panasonic KX-NS700 Installation Manual page 10

Introduction
Introduction
This Installation Manual is designed to serve as an overall technical reference for the Panasonic IP-PBX,
KX-NS700. It provides instructions for installing the hardware, and programming the PBX using Web
Maintenance Console. This PBX can also be programmed by using PT. Refer to the PT Programming Manual
for more information.
The Structure of this Manual
This manual contains the following sections:
Section 1 Safety Precautions
Provides important information intended to prevent personal injury and property damage.
Section 2 System Outline
Provides general information on the PBX, including the system capacity and specifications.
Section 3 Information about the Activation Keys
Provides information on activation keys, including how to obtain activation keys.
Section 4 Installation
Describes the procedures to install the PBX. Detailed instructions for planning the installation site, optional
service cards, and cabling of peripheral equipment are provided. Further information on system expansion
and peripheral equipment installation is included.
Section 5 Programming Information
Describes the installation procedure, structure, and functions of the Web Maintenance Console for
programming IP telephones and the PBX. Further information on programming the PBX for use with SIP
CO lines and a VoIP network is included.
Section 6 Methods of Stacking Expansion Units
Provides information about stacking Expansion Unit.
Section 7 Troubleshooting
Provides information on the PBX and telephone troubleshooting.
Section 8 Networking Information
Provides information about topics such as using the PBX in a VoIP network, and the TCP ports used by
the PBX.
Section 9 Appendix
Provides information about System Prompt Languages and the revision history.
About the Other Manuals
Along with this Installation Manual, the following manuals are available:
Feature Manual
Describes all basic, optional and programmable features of the PBX.
PC Programming Manual
Provides step-by-step instructions for performing system programming using a PC.
PT Programming Manual
Provides step-by-step instructions for performing system programming using a PT.
Operating Manual
Provides operating instructions for end users using IP-PTs, SIP phones, SLTs, PSs, or DSS Consoles.
About the software version of your PBX
The contents of this manual apply to PBXs with a certain software version, as indicated on the cover of this
manual. To confirm the software version of your PBX, see "How do I confirm the software version of the PBX
or installed cards?" in "2.3 Frequently Asked Questions (FAQ)" of the PC Programming Manual.
10 Installation Manual Document Version 2016-03