Panasonic KX-NS700 Installation Manual page 187

•
Not using a DHCP server (DHCP Server feature or an external DHCP server) when the IP-PT is on
the same LAN as the PBX
Only the PBX's IP address can be assigned automatically to the IP-PT in the process of being registered
to the PBX. For details about registering the IP-PT, refer to "5.8.1 Registering IP Telephones".
Follow the procedure below to assign the IP address of the IP-PT, the subnet mask address, and the default
gateway address manually.
If you need to set VLAN parameters, follow the procedure described in "5.7.2 Setting VLAN
Parameters" after assigning the IP addresses, without ending programming.
KX-NT300 series (except KX-NT321) and KX-NT500 series (except KX-NT551)
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Select "Network".
IP Address
To set the subnet mask address
Select "Subnet Mask".
To set the default gateway address (if required)
Select "Default Gateway".
To enter the IP address of the Secondary PBX
Return to the
Menu screen.
ENTER
Continued on next page
Document Version 2016-03
Press "SETUP" when it is displayed.
ENTER Select "Disable"
for DHCP setting.
*1
ENTER
Subnet Mask Address
ENTER
Default Gateway Address
ENTER
Select "PBX". ENTER
PBX IP Address
5.7.1 Assigning IP Addressing Information
SETUP
Select "IP Address".
*2
*3
*4
Select "PBX IP ENTER
Address".
ENTER
ENTER
ENTER
ENTER
Select "Secondary
PBX".
Installation Manual 187