Sata Configuration - Supermicro X10DRG-Q User Manual

X10DRG-Q Motherboard User's Manual
Azalia
Select Enabled to enable support for Azalia High Definition Audio. The options are
Disabled, Enabled, and Auto.
Azalia PME Enable
Select Enabled to enable power management capability of the Azalia controller. The
settings are Enabled and Disabled.

SATA Configuration


When this submenu is selected, AMI BIOS automatically detects the presence of
the SATA devices that are supported by the Intel PCH chip and displays the fol-
lowing items:
SATA Controller
This item enables or disables the onboard SATA controller supported by the Intel
PCH chip. The options are Enabled and Disabled.
Configure SATA as
Select IDE to configure a SATA drive specified by the user as an IDE drive. Select
AHCI to configure a SATA drive specified by the user as an AHCI drive. Select
RAID to configure a SATA drive specified by the user as a RAID drive. The options
are IDE, AHCI, and RAID.
*If the item above "Configure SATA as" is set to AHCI, the following items will display:
Support Aggressive Link Power Management
When this item is set to Enabled, the SATA AHCI controller manages the
power usage of the SATA link. The controller will put the link to a low power
state when the I/O is inactive for an extended period of time, and the power
state will return to normal when the I/O becomes active. The options are
Enabled and Disabled.
SATA Port 0~ Port 5
This item displays the information detected on the installed SATA drive on the
particular SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
Port 0~ Port 5
Select Enabled to enable a SATA port specified by the user. The options are
Disabled and Enabled.
4-16