Reset Button; Power Button - Supermicro X10DRG-Q User Manual

Reset Button

The Reset Button connection is located on pins
3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case. Refer to the table
on the right for pin definitions.

Power Button

The Power Button connection is located on pins
1 and 2 of JF1. Momentarily contacting both pins
will power on/off the system. This button can also
be configured to function as a suspend button
(with a setting in the BIOS - See Chapter 4). To
turn off the power when the system is in suspend
mode, press the button for 4 seconds or longer.
Refer to the table on the right for pin definitions.
Ground
FP PWRLED
HDD LED
NIC1 Link LED
NIC2 Link LED
OH/Fan Fail LED
Power Fail LED
20 19
NMI
X
X
3.3 V
3/3V Stby
NIC1 Activity LED
NIC2 Activity LED
UID LED Blue Cathode
3.3V
Reset
Ground
Ground PWR
2 1
2-25
Chapter 2: Installation
Reset Button
Pin Definitions (JF1)
Pin# Definition
3 Reset
4 Ground
Power Button
Pin Definitions (JF1)
Pin# Definition
1 Signal
2 Ground
A. Reset Button
B. PWR Button
A
Reset Button
B
Power Button