Motherboard Features - Supermicro X10DRG-Q User Manual

Motherboard Features

CPU
Memory
Chipset
Expansion
Slots
Graphics
Front Panel
Audio
Network
•
Dual Intel® E5-2600v3/v4 Series processors (Socket
R3) (LGA 2011); each processor supports dual full-
width Intel® QuickPath Interconnect (QPI) links (of
up to 9.6 GT/s one direction per QPI)
Note: E5-2600v4 requires Revision 2.0 BIOS
(or higher).
•
Integrated memory controller supports:
Up to 2048 GB of 288-pin Load Reduced (LRDIMM)
or 512 GB of Registered (RDIMM) DDR4 ECC
2400/2133/1866/1600 MHz in 16 slots.
Note: For the latest CPU/memory updates,
please refer to our website at http://www.super-
micro.com/products/motherboard.
DIMM sizes
•
DIMM Up to 128GB at 1.2V
•
Intel® PCH C612
•
Four (4) PCI-E 3.0 x16 slots (Slot2/Slot4: supported
by CPU1, Slot6/Slot8: supported by CPU2)
•
One (1) PCI-E 2.0 x4 in x8 slot with TBT support
(Slot9: supported by Intel PCH)
See the note on page 1-6.
•
One (1) PCI-E 3.0 x8 in x16 slot (Slot10: supported
by CPU1)
•
One (1) PCI-E 3.0 x8 slot (Slot11: supported by
CPU2)
•
Graphics controller via the Aspeed AST2400 BMC
•
Front Panel High-Definition (HD) audio
•
SPDIF-Input digital-audio transmitter connection
header (JSPDIF_IN1)
•
Intel® i350 Gigabit (10/100/1000 Mb/s) Ethernet
controller for LAN 1/LAN 2 ports
•
Aspeed 2400 Base-board Controller (BMC) supports
IPMI_LAN 2.0
1-7
Chapter 1: Overview