Overheat (Oh)/Fan Fail/Uid Led; Power Fail Led - Supermicro X10DRG-Q User Manual

X10DRG-Q Motherboard User's Manual

Overheat (OH)/Fan Fail/UID LED

Connect an LED cable to pins 7
and 8 of Front Control Panel to use
the Overheat/Fan Fail and UID LED
connections. The Red LED on pin 8
provides warnings of overheating, fan
failure or power failure. The Blue LED
on pin 7 works as the front panel UID
LED indicator. Refer to the tables on
the right for pin definitions.

Power Fail LED

The Power Fail LED connection is
located on pins 5 and 6 of JF1. Re-
fer to the table on the right for pin
definitions.
NIC1 Link LED
A
OH/Fan Fail LED
Power Fail LED
B
20
Ground
X
FP PWRLED
HDD LED
NIC2 Link LED
Ground
Ground
2
2-24
OH/Fan Fail/ PWR Fail/Blue_UID
LED Pin Definitions (JF1)
Pin# Definition
7 Blue_UID LED
8 OH/Fan Fail/Power Fail
OH/Fan Fail/PWR Fail
LED Status (Red LED)
State
Off
On
Flashing
PWR Fail LED
Pin Definitions (JF1)
Pin# Definition
5 3.3V
6 PWR Supply Fail
A. OH/Fail/PWR Fail LED
B. PWR Supply Fail
19
NMI
X
3.3 V
3/3V Stby
NIC1 Activity LED
NIC2 Activity LED
UID LED Blue Cathode
3.3V
Reset
Reset Button
Power Button
PWR
1
Definition
Normal
Overheat
Fan Fail