Supermicro X10DRG-Q User Manual page 14

X10DRG-Q Motherboard User's Manual
SP1
(I-)SATA 0-3
(I-)SATA 4/5
(S)-SATA0-3
I-SGPIO1/2
S-SGPIO
(CPU1) SLOT2/4
(CPU2) SLOT6/8
(PCH) SLOT9
(CPU1) SLOT10
(CPU2) SLOT11
(BP) USB 0/1 (2.0)
(BP) USB 4/5 (3.0)
(FP) USB 2/3 (2.0)
(FP) USB 6 (3.0)
(FP) USB 7/8 (3.0)
VGA
LED Description
LED1 Rear UID LED
LED2 Onboard PWR LED
LEDM1 BMC Heartbeat LED
Warning: To avoid damaging your motherboard and components, please use a
power supply that supports a 24-pin, two 8-pin and and one 4-pin power connectors.
Be sure to connect the 24-pin and the 8-pin power connectors to your power supply
for adequate power delivery to your system. The 4-pin power connector is optional;
however, Supermicro recommends that this connector also be plugged in for optimal
power delivery.
Note: This motherboard supports the latest Thunderbolt technology. For
Thunderbolt support, install the Thunderbolt add-on card on PCH SLOT9
and connect the GPIO cable from the Thunderbolt add-on card to the GPIO
header JTBT1 on the motherboard for TBT hot-plug support.
Internal buzzer/speaker
Intel® SATA 3.0 connectors (0-3) from Intel® PCH
Intel® SATA SuperDOM connectors (I-SATA4/5) from
Intel® PCH
SATA connectors (0-3) from Intel® SCU
Serial_Link General-Purpose I/O (SGPIO) headers for I-
SATA connections (I-SGPIO1 for I-SATA0-3, I-SGPIO2 for
I-SATA4/5)
Serial_Link General-Purpose I/O (SGPIO) headers for S-
SATA connections (S-SATA0-3) supported by Intel® SCU
PCI-Exp. 3.0 x16 Slot2/Slot4 supported by CPU1
PCI-Exp. 3.0 x16 Slot6/Slot8 supported by CPU2
PCI-Exp. 2.0 x4 in x8 slot with TBT support (from Intel PCH)
(See the note below for Thunderbolt AOC support)
PCI-Exp. 3.0 x8 in x16 slot supported by CPU1
PCI-Exp. 3.0 x8 slot supported by CPU2
Back panel USB 2.0 ports 0/1
Back panel USB 3.0 ports 4/5
USB 2.0 connections 2/3 header for front access
Type A USB 3.0 connector 6 for front access
USB 3.0 connections 7/8 header for front access
Backpanel VGA port
X10DRG-Q LED Indicators
State
Blue: On
On
Green: Blinking
1-6
Status
Unit Identified
System Power On
BMC Normal