Hughes HN9400 Installation Manual page 84

Chapter 6
Parameter
Signal Strength
Receive Status
Transmit Status
Software Download Status
Service Status
TCP Acceleration Status
Web Acceleration Status
Diagnostics Code
HN9400 Satellite Router Installation Guide
72
1038554-0001 Revision B
Figure 57: System Status page
The parameters listed on the System Status page are explained in the following table.
Table 6: System Status page parameters
Receive signal strength. A value of 30 or less indicates a weak
signal.
Indicates if the receive data path is operational or other status. Click
the displayed RxCode for explanation of the displayed code.
Indicates if the transmit data path is operational or other status.
Click the displayed TxCode for corresponding Help information.
Indicates if the satellite router's software and configuration are up
to date.
Indicates if the router has been commissioned (registered with the
system). You can determine if the router has ever been
de-commissioned by clicking the Service History link.
Indicates if TCP Acceleration is operational or other status. TCP
acceleration improves the router's performance.
Indicates if Web Acceleration is operational or other status. Web
acceleration improves web browsing performance.
This field is present only if the NOC operator has enabled Web
Acceleration on the satellite router.
If you need technical assistance, this code may be useful to Installer
Support.
System Control Center
Explanation