Table of Contents
Advertisement
LEDs
LED
Appearance
Blinking
Off *
System
Blinking *
Off *
Power
Flashing
Blinking
Off *
Bold type indicates LED appearance during normal operation when the satellite router is transmitting or
receiving data.
*Indicates an operational problem.
LAN port LEDs
Using LEDs for troubleshooting
Receiving data
Condition preventing receipt of data
On
Connection established with the NOC
Virus protection blocking data
Condition preventing full operation
On
Power is on and the router is functioning normally
Operating with fallback.bin (backup) version of software
Router is not commissioned or has lost its configuration data
No power
If it appears the LEDs are not functioning properly, make sure you have the correct power supply.
Refer to
Table 2: Power supply specifications for the HN9400 satellite router
detailed power supply information.
Green and orange LEDs on the each of the two LAN (Ethernet) ports on the router's rear panel
indicate link status and speed, as explained in
Figure 67: LAN port LEDs
For information on using the satellite router's LEDs for troubleshooting, see:
Satellite router status
Figure 67: LAN port LEDs
HN9400 Satellite Router Installation Guide
1038554-0001 Revision B
Chapter 7
on page 10 for
on page 83.
83
Advertisement
Table of Contents
Troubleshooting
