Figure 35: Selecting The Registration Server - Hughes HN9400 Installation Manual

Chapter 4
HN9400 Satellite Router Installation Guide
46
1038554-0001 Revision B
2. On the Registration Server Selection screen, select a registration server from the drop-down
list.
• For U.S. and Canadian consumer installations, select SAN_and_PIN_Registration.
• For enterprise installations and installations outside of the United States and Canada,
select SiteID_Registration.
If you are unsure which server to select, refer to the Installation Reference Sheet or installation
specification.

Figure 35: Selecting the registration server

If necessary, you can manually enter the registration server's address as follows:
a) Select the Enter Registration Server Address Manually checkbox.
b) Enter the registration server's address in the HTTP:// field.
c) Select the Secure HTTP Mode checkbox to enable a secure connection to the registration
server.
3. Click Next.
The Registration in Progress screen appears, displaying registration status information.
Commissioning the satellite router