Table of Contents
Advertisement
Chapter 6
Status and information screens
Red flag indicator
HN9400 Satellite Router Installation Guide
70
1038554-0001 Revision B
Several of the System Control Center screens list status and operational parameters and their
current values in a tabular format. For example, the following illustration shows the Reception
Information page. The left column list the parameters, and the right column shows the current
value of the parameter listed in the left column. Parameters are listed in this format on these
screens:
• System Status page
• Reception Information page
• Transmission Information page
On any of these screens, if a parameter name or the current value of a parameter is underlined,
you can click the name or value to see an explanation of it.
Figure 55: Format of status and information screens
The parameters listed on each screen are explained in this guide in the section for each screen:
•
System Status page
on page 71
•
Reception Information page
•
Transmission Information page
•
System Information page
On the status and information screens, a red flag next to a value indicates a problem related to
the parameter listed in the same row where the flagged value appears. The flagged value appears
in the right column; the parameter appears in the left column. The value indicates the current
state of the parameter.
on page 73
on page 75
on page 76
System Control Center
Advertisement
Table of Contents
Troubleshooting
