Table of Contents
Advertisement
Chapter 4
Entering commissioning parameters
HN9400 Satellite Router Installation Guide
28
1038554-0001 Revision B
Figure 12: Configuration File Upload screen
5. Click Browse on the Configuration File Upload screen.
6. Navigate to the location on the installer laptop where you saved the sbc.cfg file.
7. Select the sbc.cfg file and click Open.
8. Click Upload, and wait for the upload to complete.
9. Wait to see the message shown in
which indicates that the configuration has been transferred to the router.
Figure 13: Confirming the sbc.cfg file upload
10. After the upload completes, click Close on the Configuration File Upload screen to return
to the Satellite Setup menu.
To commission the satellite router you enter parameters for the antenna location, satellite, and
radio. In some circumstances you may have to enter the antenna location and/or satellite
parameters manually, as explained in the sections that follow.
Commissioning the satellite router
Figure 13: Confirming the sbc.cfg file upload
on page 28,
Advertisement
Table of Contents
Troubleshooting
