Commissioning the satellite router
Figure 23: Verification of Receive LNB Parameters screen
3. Verify that the displayed information is correct and click Next.
The Transmit Radio Parameters screen appears.
Figure 24: Transmit Radio Parameters screen
4. On the Transmit Radio Parameters screen, use the checkbox to select the radio part number
if you know it—otherwise, select the transmit radio type (1 Watt or 2 Watt).
The radio part number should be on the Installation Reference Sheet or installation
specification.
HN9400 Satellite Router Installation Guide
1038554-0001 Revision B
Chapter 4
37