Table of Contents
Advertisement
60
Seats and storage
--
~
Alternatively,
push
the switch
ot the reor
onlyq.&..
~
To angle the seat cushion
down, push
the
switch
ot the front only
q
.&..
~
Alternatively,
pull
the switch
ot the reor on-
Iyq.&..
.&.
WARNING
- Never adjust the driver's or front passen-
ger seat while the vehicle is moving. If
you do this while the vehicle is moving,
you will be out of position. Always adjust
the driver's or front passenger seat when
the vehicle is not moving.
- Be careful when adjusting the seat
height. Check to see that no one is in the
way, or serious injury could result!
- Because the seats can be electrically ad-
justed with the ignition key removed,
never leave children unattended in the
vehicle. Unsupervised use ofthe electric
seat adjustments may cause serious in-
jury.
Adjusting the seatback
Applies ta vehicles: with power seats
Fig. 63 Driver seat: switch for seatback adjustment
~
Push or pull the switch in the same direc-
tion you like the seatback to tilt
qfig. 63.
.&.
WARNING
- Never adjust the seatback while the vehi-
cle is moving. If you adjust your seatback
while the vehicle is moving, you will be
out of position. Always adjust the seat-
back when the vehicle is not moving.
- To reduce the risk of injury in the case of
sudden braking or accident, front pas-
sengers must never ride in a moving ve-
hicle with the seatback reclined. Safety
belts and the airbag system only offer
maximum protection when the seatback
is upright and the safety belts are prop-
erly positioned on the body. The more
the seatback is reclined, the greater the
risk of personal injury from an incorrect
seating position and improperly posi-
tioned safety belts!
Folding the front seatback forward
•
Applies ta vehicles: with power seats
Fig. 64 Driver seat: seatback release lever
Folding the seatback forward
.. Lift the lever up as indicated by the arrow
qfig.64 .
.. Hold the lever and fold the seatback for-
ward.
.&.
WARNING
\..
Always make sure the front seatbacks are
in the upright position and securely locked
in place when driving.
>
Lumbar support
APplies to vehicles: with lumbar support
he lumbor support con be odjusted to fit the
r:
,
.
naturol eurvoture of the occupant s spme.
Fig. 65 Front seat: switch for lumbar adjustment
Adjusting the curvature
~
Push the
forword
depression on the switch
shell
q
fig.
65 to
increase
backrest curva-
ture.
~
Push the
rear
depression on the switch shell
to
decreose
backrest curvature.
Adjusting the height
~
Push the
top
depression on the switch shell
to
raise
the support in the backrest.
~
Push the
bottom
depression on the switch
shell to
lower
the support in the backrest.
8..
WARNING
Never adjust the lumbar support while the
vehicle is moving. If you adjust your seat
while the vehicle is moving, you will be out
of position. Always adjust the lumbar sup-
port when the vehicle is not moving.
Head restraints
Adjusting head restraints, front seats
The heod restroints must be odjusted proper-
Iy to provide protection.
Fig. 66 Driver's seat head restraint: adjusting the
height
'The head restraints on the
front
seats can be
adjusted to provide safe support to head and
neck at the optimum height. When optimally
adjusted, the top of the restraint should be
level with the top ofthe head
qpoge 97,
Proper odjustment of heod restraints.
Raising head restraint
~
Grasp the side of the head restraint with
both hands.
~
Adjust the head restraints so that the top of
the head restraint is
ot leost
level with your
eyes or higher
q
fig. 66.
Lowering head restraint
~
Grasp the sides of the head restraint with
both hands.
~
Press the button
q
fig.
66 and adjust the
head restraint.
~
Adjust the head restraints so that the top of
the head restraint is
ot leost
level with your
eyes or higher
q
fig. 66.
Refer to
q
page
97,
Proper odjustment of
heod restraints
for guidelines on how to ad-
just the height of the front head restraints to
fit the occupant's body size.
Hide quick links:
Advertisement
Table of Contents
