Multi-Display Setup; Grayscale Setup; More Powerdesk Information - Matrox RAD Series User Manual

To rotate your display with Matrox software:
From the main interface of PowerDesk
1
Monitor Adjustments
Select the appropriate monitor, then click
2
If you're using multiple displays and you want to re-orient your displays as if they were
3
one display, enable
Using the arrows buttons, re-orient your display, then click
4

Multi-display setup

To set up multi-display mode:
From the main interface of PowerDesk
1
Multi-Display Setup
Select the number of displays and the multi-display setup you want to use.
2
Click
3
computer.

Grayscale setup

To select the grayscale setup for your displays:
From the main interface of PowerDesk
1
Grayscale Setup
Select the grayscale setup you want. For more information, see the Matrox PowerDesk
2
online documentation.
Click
3
computer.
Note:
intended primarily for digital monitors. For analog monitors, the accuracy and consistency
of the grayscale setup is dependent on your monitor and its calibration.

More PowerDesk information

For more information on Matrox PowerDesk, click
of PowerDesk (see "Accessing PowerDesk", page
.
Rotate as one display
.
or for your changes to take effect. You may be prompted to restart your
OK Apply
.
or for your changes to take effect. You may be prompted to restart your
OK Apply
With your Matrox RAD Series product, DICOM-compliant grayscale output is
(see "Accessing PowerDesk", page
Adjust orientation
.
(see "Accessing PowerDesk", page
(see "Accessing PowerDesk", page
"
Help PowerDesk guide
13).
Matrox RAD Series – User Guide 15
13), click
.
.
OK
13), click
13), click
from the main interface