Dualhead Multi-Display Setup - Matrox Millennium G400 User Manual

If you want to customize your Windows monitor settings:
Access the PowerDesk
1
property sheets", page
2 Depending on what you want to do, click one of the buttons in the
selection method
Windows NT 4.0 –
1 Click
Monitor
2 If you have a Plug-and-Play monitor:
Make sure the
selected. If so, the Matrox display driver automatically uses the correct settings for your
monitor. If not, click this button, then click
If you don't have a Plug-and-Play monitor:
See if the
so, use the Matrox monitor selection method. For more information on Matrox monitor
selection, see Matrox PowerDesk online documentation.
Notes:
„
In multi-display mode
monitor settings.
„
If you're using BNC connectors with a Plug-and-Play monitor, the Plug-and-Play feature
of your monitor can't be used. To use the Plug-and-Play feature of your monitor, instead
of the BNC connectors, use the 15-pin connector at the back of your monitor.
„
In Windows 95/98, Matrox monitor settings are based on Windows monitor settings. If
you change your Windows monitor settings, you may have to reselect or readjust your
Matrox monitor settings.

DualHead Multi-Display setup

If your Matrox graphics card has a second monitor connector
display (for example, a computer monitor or a TV) as part of your Windows desktop. This is the
Matrox DualHead Multi-Display feature. To use this feature:
Windows 98 –
1 Access the PowerDesk
sheets", page
Select the
2
Monitor Settings
8).
box, then follow the on-screen instructions.
Æ Æ
Programs Matrox PowerDesk NT
.
Plug-and-Play (DDC) monitor
Default monitor (60 Hz)
(see "DualHead Multi-Display
DualHead
8).
DualHead Multi-Display
property sheet (see "Accessing PowerDesk
Æ
Matrox Display Properties
button is
.
Apply
button is selected. If
setup"), each monitor has its own
(see page
property sheet (see "Accessing PowerDesk property
option button.
Matrox Graphics Card – User Guide
Monitor settings
Æ
6), you can enable a second
9