Software Setup - Matrox RAD Series User Manual

Software setup

Note: This guide has references that are specific to the Matrox installation CD-ROM. If your Matrox
product wasn't packaged by Matrox (for example, if it was included with your computer), your
product may not include this CD-ROM.
If you don't have this CD-ROM, certain references in this guide may not reflect the software you
have. For more information, see other software documentation provided by your system vendor.
This section describes how to install Matrox software for Windows
2000/XP.
You may need administrator rights to install certain software. For
more information, see Windows documentation or contact your
system administrator.
Install display driver
1
display drivers haven't been previously installed, Windows prompts you to install a display
driver. Follow the on-screen instructions. (The Matrox Windows 2000/XP display driver is in
the Win2kXP folder of your Matrox installation CD-ROM.)
Install optional software
2
the Matrox installation CD-ROM in your CD-ROM drive – the CD-ROM installation
program automatically starts.
information you can access. Follow the on-screen instructions.
Set up your display software
3
* If Windows doesn't automatically start the setup program, you can start it manually from the root folder of the CD-ROM.
12 Matrox RAD Series – User Guide
Windows detects new hardware when you restart. If Matrox
After your computer has restarted, insert (or reinsert)
*
This program shows you a list of items you can install and
See "Display setup", page 13.