Matrox RAD Series User Manual page 7

Insert your Matrox card
3
Position your Matrox card over the
a
expansion slot you've chosen.
Push the card in firmly and evenly until
b
it's fully seated in the slot.
Secure the bracket of your Matrox card
c
to the computer frame.
Your Matrox card is now installed. Before restarting your computer, connect your monitor or
monitors (see "Connection setup", page
Matrox software (see "Software setup", page
WARNING: If your computer doesn't restart after your Matrox card is installed, turn off
your computer to avoid damaging electronic parts. For troubleshooting information,
page 16.
9). After connecting, restart your computer and install your
12).
Matrox RAD Series – User Guide
see
7