Table 1-4 I/O Connectors (Rear Panel) - Themis RES-22XR3 Installation Manual

RES-22XR3 Installation Manual - Configuration 3
Connector
PS/2 Mouse
PS/2 Keyboard
USB 0 and USB 1
Hi-Speed USB 2.0
Serial Ports
COM 1 Serial Port
Super VGA Port
Ethernet LAN Ports
IPMI Dedicated LAN
Port
1-8
Table 1-4. I/O Connectors (Rear Panel)
 6-pin mini-DIN (female) connector to attach a PS/2 mouse device.
 6-pin mini-DIN (female) connector to attach a PS/2 keyboard device.
 Two 4-pin USB connectors to attach serial devices to USB Port 0 and
USB Port 1.
Note: Two 2x5-pin USB type-A headers (2 ports each, USB4/USB5
and USB6/USB7) and 2 USB 4-pin headers (USB2 and USB3) can
be accessed directly from the motherboard.
 One DB9 (male) connector on rear panel to attach a serial device to
COM 1port
Note: A second serial port (COM 2) can be accessed directly from the
motherboard.
 15-pin SVGA connector to attach a monitor device.
 Standard RJ45 connector to attach one or two gigabit Ethernet LAN
line(s)—LAN 1 and LAN 2.
Note: LAN 3 and LAN 4 are supported by the X8DT3-LN4F mother-
board only.
 Standard RJ45 connector to attach a dedicated IPMI LAN line.
(X8DT3-F and X8DT3-LN4F motherboards only).
Description
Version 1.0
Themis Computer