Rn0400 - Manitowoc RNS0244 Technician's Handbook

RN0400

Self-Contained Air-Cooled & Water-Cooled
NOTE: Ice machines use an auger to remove ice from the
evaporator. Occasional noises (creaks, groans, squeaks, or
pops) are a normal part of the ice making process.
Operation
The ice machine will not start until:
A. The compressor rocker switch is moved to "ON".
B. Ice does not contact the bin thermostat bulb.
C. The water reservoir is full of water.
With power supplied and the compressor rocker switch in
the ON position, the gear motor and refrigeration system
start. The float valve controls the water inlet valve and
water level. The freeze cycle ends when ice contacts the
bin thermostat. A 20 minute delay period initiates. The ice
machine will restart when ice no longer contacts the bin
thermostat and the 20 minute delay period expires.
Part Number 000007661 11/16 47