Cleaning Sanitizing Procedure Rn0400 - Manitowoc RNS0244 Technician's Handbook

Flake & nugget ice machine r series
Table of Contents

Advertisement

CLEANING SANITIZING PROCEDURE RN0400

Use Ice Machine Cleaner part number 000000084.
Use Ice Machine Sanitizer part number 94-0565-3.
Step 1
Disconnect power, remove front, top and right
panels and set the compressor rocker switch to the OFF
position.
Step 2
Remove all ice from the bin/dispenser.
Step 3
Turn off the ice making water supply.
Step 4
Drain water from evaporator and reservoir
through the evaporator/reservoir drain line and reinsert
hose into hose clip.
Step 5
Follow the chart and premix cleaner and water.
Amount of Luke Warm
Water
1 gallon (4 Liters)
Step 6
Remove top cover from the water reservoir and
fill the evaporator and reservoir with cleaning solution.
Remainder of solution will be used for hand cleaning.
Step 7
Verify the compressor rocker switch is in the
OFF position, then reconnect power and run the gear
motor for 15 minutes. Perform the following procedures
during the 15 minute period:
Remove ice compression nozzle from evaporator and
soak in cleaning solution.
Descale drain pan by gently flexing, then remove any
scale residue.
Inspect water feed and drain lines and clean as
needed.
Connect ice transport tube direct to evaporator and
secure with hose clamp.
36
Amount of Cleaner
Part Number 000000084
4 ounces (120 ml)
Part Number 000007661 11/16

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RNS0244 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents

Save PDF