Image Settings - D-Link DCS-7110 User Manual

Configuration
This page allows you to tune the white balance, brightness, saturation, contrast, and sharpness settings.
Color: Select either Color or B/W (black and white/monochrome) video display.
Power Line Frequency: Select either 50 Hz or 60 Hz depending on your region.
Video Orientation: Select Flip to vertically rotate the video. Select Mirror to horizontally rotate
the video. Select both options if your camera is being installed upside down.
White Balance: This adjusts the relative amount of red, green, and blue primary colors in the
image so that the neutral colors are reproduced correctly.
• Auto: The camera automatically adjusts the color temperature of the light in response to
different light sources. The white balance setting defaults to Auto and works well in most
situations.
• Fixed: Follow the steps below to manually set the white balance to compensate for the
ambient lighting conditions:
1. Set the White balance to Auto and click Save.
2. Place a sheet of white paper in front of the lens, then allow the camera to adjust the color
temperature automatically.
3. Select Fixed to confirm the setting while the white balance is being measured.
4. Click Save to enable the new setting.
Overlay Title and Time Stamp on Video: Select this option to place the video title and time on
the video streams.
Privacy Mask: You can block out certain sensitive zones for privacy concerns. To set up a Privacy
Mask, follow the steps below:
1. Click Privacy Mask.
2. Click New to add a window.
3. Use your mouse to change the height and width of the window and move the window
to the desired location.
4. Enter a name for the window and click Save to apply changes.
5. Select Enable privacy mask to activate this function.
Note: Up to five privacy mask windows can be set up on the same screen.
D-Link DCS-7110 User Manual

Image Settings

Privacy Mask
32