Image Settings - D-Link DCS-6113 User Manual

Configuration
This page allows you to tune the white balance, brightness, saturation, contrast,
and sharpness settings for the video.
Color: Select either a Color or B/W (black and white, monochrome) video display.
Power Line Frequency: Select either 50 or 60 Hz depending on your region.
Video Orientation: Flip will vertically rotate the video. Mirror will horizontally
rotate the video. You may select both options if camera is being installed upside
down.
White Balance: This adjusts the relative amount of red, green and blue primary
colors in the image so that the neutral colors are reproduced correctly.
• Auto: The camera automatically adjusts the color temperature of the light
in response to different light sources. The white balance setting defaults to
Auto and works well in most situations.
• Fixed: Follow the steps below to manually set the white balance to
compensate for the ambient lighting conditions
1. Set the White balance to Auto and click Save.
2. Place a sheet of white paper in front of the lens, then allow the camera to
adjust the color temperature automatically.
3. Select Fixed to confirm the setting while the white balance is being
measured.
4. Click Save to enable the new setting.
D-Link DCS-6112 /6113 / 6113V User Manual

Image Settings

32