Network; Ip Settings; Ipv4 - D-Link DCS-7110 User Manual

Configuration

IPv4

LAN: Select this option when the camera is deployed on a local area network
(LAN) and is intended to be accessed by local computers. This is the default
setting.
• Get IP address automatically (DHCP): Select this connection if you have
a DHCP server such as a router running on your network and would like an
IP address to be assigned to the camera automatically.
• Use fixed IP address: Select to manually enter the camera's IP settings.
IP Address: Enter an IP address for your camera.
Subnet Mask: Enter the subnet mask of your network.
Default Router: Enter the default gateway address.
Primary/Secondary DNS: Enter the DNS server address(es).
Primary/Secondary WINS Server: Enter the WINS server address(es).
Enable UPnP Presentation: Select this option to enable UPnP presentation
for the camera so that whenever a camera is presented to the LAN, shortcuts
of connected cameras will be listed under Network. You can click the shortcut
to link to the web browser.
Enable UPnP Port Forwarding: To access the camera from the Internet, select
this option to allow the camera to open ports on the router automatically so
that video streams can be sent out from a LAN. To utilize this feature, make
sure that your router supports UPnP and it is activated.
D-Link DCS-7110 User Manual

Network

IP Settings

35