Cable Connections - D-Link DCS-7110 User Manual

Installation

Cable Connections

Connection Using a PoE Switch
If you are using a PoE switch, connect the network camera via Ethernet cable. PoE will transmit
both power and data over a single cable.
Basic Connection (without PoE)
1. Connect the camera to your switch or router via Ethernet cable.
2. Connect the power cable from the camera to a compatible 12 V power adapter (not included).
3. Connect the power adapter to a power outlet.
Note: Once power has been established, the LED will turn red. When the device has obtained an
IP address and is accessible, the LED will turn green.
D-Link DCS-7110 User Manual 13