D-Link DCS-7110 User Manual page 30

Configuration
Click Sensor Settings to open the Sensor Settings page. Here you can set the maximum exposure
time, exposure level, and AGC (Auto Gain Control) settings. You can also configure two different
profiles: one for normal situations, the other for special situations, such as day/night/schedule mode.
Exposure
• Maximum Exposure Time: Select a proper maximum exposure time according to the light
source of the surroundings. Shorter exposure times result in less light reaching the sensor. The
exposure times are selectable for the following durations: 1/30 second, 1/15 second, and 1/5
second.
• Exposure level: Select the exposure level which ranges from 1 to 8 (dark to bright).
• Max. Gain (Auto Gain Control): You can manually set the AGC level (2X 4X, or 8X). The higher
the value, the brighter the image will be.
• Enable BLC (Back Light Compensation): Enable this option when the object is too dark or too
bright to recognize. It allows the camera to adjust to the best light conditions in any environment
and automatically give the necessary light compensation.
• Profile: If you want to configure another sensor settings profile for day/night/schedule mode,
click Profile 2 and follow the steps below to setup:
1. Click Enable this profile.
2. Select either Day mode, Night mode, or Schedule mode. If you select Schedule mode,
manually enter a time range.
3. Configure the Exposure settings as explained above.
4. Configure the Image settings. Refer to "Image Settings" on page 32 for more
information.
5. Click Save to enable the setting and click Close to exit the page.
• Preview: Click to view your current settings in the preview window.
• Restore: Click to reset the settings back to the original values.
• Save: Click to enable your settings.
• Close: Click to close the window.
D-Link DCS-7110 User Manual
Sensor Settings
Profile 2
30