Configuration
Configuration
This section explains how to configure your new D-Link Network Camera using the Web-based Configuration Utility.
Click on the D-Link Setup Wizard SE icon that was created in your Windows
Start menu.
Click Start and then click All Programs. Scroll down to the D-Link folder,
open the Setup Wizard SE folder and click D-Link Setup Wizard SE.
Select the camera and click the Link button to access the web configuration. The
Setup Wizard will automatically open your default web browser to the IP address of
the camera.
Note it is recommended to use Internet Explorer. If Internet Explorer is not your
default browser, note the IP address of the camera in the list and click Exit. Open
Internet Explorer and enter the IP address of the camera (http://192.168.0.20 is the
default IP address).
D-Link DCS-7110 User Manual
Configuration
Web-based Configuration Utility
20