Image And Audio Settings - D-Link DCS-7513 User Manual

Section 3: Configuration
In this section, you may configure the video image settings for your camera. All changes in the Image Settings section will be made immediately.
For the other sections, after making any changes, click the Save button to save your changes.
Image & Audio
Mirror: This will mirror the image horizontally.
Flip: This will flip the image vertically. When turning Flip on, you may want to
consider turning Mirror on as well.
DIS: Enabling Digital Image Stabilization (DIS) will slightly reduce the viewing
area of the camera in order to provide image stabilization. This is useful when
the camera is mounted in a place that may be affected by wind or vibration.
Anti-Flicker: Select the frequency used by your power lines to avoid interference or
distortion.
White Balance: Use the drop-down box to change white balance settings to help balance
colors for different environments. You can choose from Auto, Outdoor,
Indoor, Fluorescent, and Push Hold. If you choose Push Hold, hold a white
card or grey card in front of the camera, then click the Save button to set the
camera's white balance.
Exposure Changes the exposure mode. Use the drop-down box to set the camera for
Mode: Indoor, Outdoor, or Night environments, or to Moving to capture moving
objects. The Low Noise option will focus on creating a high-quality picture
without noise. You can also create 3 different custom exposure modes.
Shutter: If the Exposure Mode is set to one of the Customize modes, you can change
the minimum and maximum shutter speeds.
Auto Iris: Selecting this option will allow the camera to automatically determine the
optimal iris adjustment.
D-Link DCS-7513 User Manual

Image and Audio Settings

42