Ipv6 - D-Link DCS-7110 User Manual

Configuration

IPv6

Enable IPv6: Select this option and click Save to enable IPv6 setting. Please note that
this only works if your network environment and hardware equipment support IPv6. The
browser should be Internet Explorer 8 or higher.
When IPv6 is enabled, by default, the camera will listen to router advertisements and be
assigned a link-local IPv6 address accordingly.
IPv6 Information: Click this button to obtain the IPv6 information. If your IPv6 settings
are successful, the IPv6 address list will be listed in the pop-up window.
Please follow the steps below to link to an IPv6 address:
1. Open your web browser.
2. Enter the link-global or link-local IPv6 address in the address bar of your web browser.
3. Press Enter on the keyboard or click Refresh button to refresh the webpage.
Manually Setup the IP Address: Select this option to manually configure IPv6 setting if
your network environment does not have DHCPv6 server and advertisements-enabled
routers.
D-Link DCS-7110 User Manual
IPv6 Information
37