Image Settings - D-Link DCS-6112 User Manual

Configuration
The Image Settings page allows you to control the display of the video. Adjust white
balance, brightness, saturation, contrast, and sharpness settings.
Color: Select either Color or B/W (black and white) for the video display.
Power Line Frequency: Select either 50 Hz or 60 Hz, depending on your region.
Video Orientation: Select Flip to vertically rotate the video. Select Mirror to
horizontally rotate the video. You may select both options if the camera is being
installed upside-down.
White Balance: This adjusts the relative amount of red, green and blue primary
colors in the image so that the neutral colors are reproduced correctly.
• Auto: The camera automatically adjusts the color temperature of the light in
response to different light sources. The white balance setting defaults to Auto
and works well in most situations.
• Fixed: Follow the steps below to set the white balance:
1. Set the White balance to Auto and click Save.
2. Place a sheet of white paper in front of the lens, then allow the camera to adjust
the color temperature automatically.
3. Select Fixed to confirm the setting while the white balance is being measured.
4. Click Save to enable the new settings.
D-Link DCS-6112 /6113 User Manual

Image Settings

33