Image Settings - D-Link DCS-7517 User Manual

Configuration
This page allows you to tune the white balance, brightness, saturation, contrast, and
sharpness settings for the video.
Color: Select either a Color or B/W (black and white, monochrome) video display.
Power Line Frequency: Select either 50 or 60 Hz depending on your region.
Iris Mode: Select the environment that the camera will primarily be viewing. This
can be set to Fixed, Indoor, or Outdoor.
Video Orientation: Flip will vertically rotate the video. Mirror will horizontally rotate
the video. You may select both options if your camera is installed upside down.
White Balance: This adjusts the relative amount of red, green, and blue primary
colors in the image so that neutral colors are reproduced correctly.
• Auto: The camera automatically adjusts the color temperature of the light in
response to different light sources. The white balance setting defaults to Auto
and works well in most situations.
• Fixed: Follow the steps below to manually set the white balance to compensate
for ambient lighting conditions:
1. Set the White balance to Auto and click Save.
2. Place a sheet of white paper in front of the lens, then allow the camera to
adjust the color temperature automatically.
3. Select Fixed to confirm the setting while the white balance is being
measured.
4. Click Save to enable the new setting.
D-Link DCS-7517 User Manual

Image Settings

35