Tamper Detection - D-Link DCS-7110 User Manual

Full hd day & night network camera

Table of Contents

Configuration

With tamper detection, the camera is capable of detecting incidents such as redirection, blocking or de-focusing, or even spray paint.

To enable tamper detection, follow the steps given below:

1. Check the Enable camera tampering detection box.

2. Enter the tamper trigger duration (10 sec. ~ 10 min.). The tamper alarm will be

triggered only when the tampering factor (the difference between current frame

and pre-saved background) exceeds the trigger threshold.

Set up the event source as Camera Tampering Detection on Event Settings > Server

Settings. Please refer to "Event Settings" on page 53 for more information.

D-Link DCS-7110 User Manual

Tamper Detection

Table of Contents