Transferring The Power Entry Modules; Reinstalling The Power Entry Modules - Cisco 12404 Installation And Configuration Manual

Transferring System Components

Transferring the Power Entry Modules

Reinstalling the Power Entry Modules

Cisco 12404 Internet Router Installation and Configuration Guide
5-46
If your system is equipped with AC PEMs, remove each PEM as instructed in the
"Removing and Replacing an AC Power Entry Module" section on page
As you remove each PEM, move it away from the chassis and set it aside. You will
reinstall the PEMs in the replacement chassis AC PEM bay.
If your system is equipped with DC PDUs and DC PEMs, remove each PEM and
PDU as instructed in the
page 5-42.
As you remove each PEM and PDU, move them away from the chassis and set
them aside. You will reinstall both units in the replacement chassis DC PEM and
DC PDU bay.
If your replacement router is to be equipped with AC PEMs, reinstall the
AC PEMs as instructed in the
Module" section on page
If your replacement router is to be equipped with DC PEMs and DC PDUs,
reinstall the DC PEMs and DC_PDUs as instructed in the
Replacing a DC Power Entry Module" section on page 5-14
Replacing a DC PDU" section on page
Chapter 5 Maintaining the Cisco 12404 Internet Router
"Removing and Replacing the Chassis" section on
"Removing and Replacing an AC Power Entry
5-10.
5-19.
5-10.
"Removing and
and "Removing and
OL-11636-01