Setup Command Interactive Script Example - Cisco 12404 Installation And Configuration Manual

Chapter 3 Installing the Cisco 12404 Internet Router
Configuration Changes
You must allow the entire System Configuration Dialogue script to run, until you
come to the item that you want to change. To accept default settings for items that
you do not want to change, press the console keyboard Return key. To return to
the privileged EXEC prompt without making changes press ^C. To access help
text in the setup command utility, press the question mark key (?) at any prompt.
When you complete your changes, the setup command utility displays the
configuration command script that was created as a result of the changes you
entered during the setup session. It also queries if you want to use this
configuration. If you answer Yes, the configuration is saved to NVRAM. If you
answer No, the configuration is not saved and the process begins again. There is
no default for this prompt; you must answer either Yes or No.
The following example shows a setup session automatically invoked during the
first-time startup of the router. During the first-time startup, the system displays
the system banner information, then starts the System Configuration Dialog.
The output examples shown in this section depend on the image version of the
Cisco IOS software and the way your Cisco 12404 router is equipped. Your
configuration dialog might be different.
The setup command script is a self-guiding interactive script that prompts you for
responses and provides default or alternative values wherever possible.

setup Command Interactive Script Example

Cisco Internetwork Operating System Software
.
.
.
--- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: Yes
At any point you may enter a question mark '?' for help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets '[]'.
Basic setup only configures enough connectivity
for management of the system, extended setup will ask you
to configure each interface of the system.
Would you like to enter basic management setup? [yes/no]: Yes
Configuring global parameters:
Cisco 12404 Internet Router Installation and Configuration Guide
3-57
OL-11636-01