Cisco 12404 Installation And Configuration Manual page 200

Overview
Table 5-1
FRU
Line cards
Route processor
CSF card
Fan tray assembly
Cable management bracket
Center mount brackets
As your networking requirements change, you will want to upgrade your system
by adding or changing components. The following sections describe tools and
instructions to assist you in performing upgrades and periodic maintenance on
your Cisco 12404 router.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Cisco 12404 Internet Router Installation and Configuration Guide
5-2
FRU Online Insertion and Removal Chart (continued)
Tools and Equipment, page 5-3
Powering Off an AC Powered Router, page 5-3
Powering Off a DC Powered Router, page 5-5
Removing and Installing the Front Door on Cisco 12404 Enhanced Series
Router, page 5-6
Removing and Replacing an AC Power Entry Module, page 5-10
Removing and Replacing a DC Power Entry Module, page 5-14
Removing and Replacing a DC PDU, page 5-19
Cleaning and Replacing the Air Filter, page 5-25
Removing and Replacing the Fan Tray Assembly, page 5-28
Removing and Replacing an RP or Line Card, page 5-31
Removing and Replacing a Consolidated Switch Fabric Card, page 5-39
Removing and Replacing the Chassis, page 5-42
Transferring System Components, page 5-45
Removing the Chassis from the Equipment Rack, page 5-48
Installing the Replacement Chassis, page 5-50
Restarting the Cisco 12404 Internet Router, page 5-53
Chapter 5 Maintaining the Cisco 12404 Internet Router
Hot Swappable
Yes
Yes (if redundant RPs installed)
No
Yes
n/a
n/a
OL-11636-01