Specifications - Cisco 12404 Installation And Configuration Manual

Appendix A Technical Specifications

Specifications

OL-11636-01
Table A-1 Cisco 12404 Internet Router Product Architecture (continued)
Feature Description
Power 110V AC power, sufficient to handle three OC192c /10GE
Requirements capable line cards and one 10G capable RP.
Total power supplied to the system should not exceed
1200VA
Two AC or DC power supplies in redundant configuration
should be able to support the entire power needs of the
chassis.
Power Supply Redundant and load sharing AC power entry module (PEMs),
Redundancy or
Redundant and load sharing DC PEMs and DC power
distribution units (PDUs)
Route Supports up to 2 RPs per system
Processors The second RP can be used in any slot
The first RP is inserted in slot 0 (1.25 inch height) see
Figure A-4
Route Supports online insertion and removal, hot swappable RP
Processor redundancy
Redundancy
Switch Fabric The switch fabric supports up to 80 Gbps of capacity
NEBS The Cisco 12404 Inernet Router is designed to comply with
NEBS Level 3 certification
1. A narrow card filler panel must be used to ensure proper air flow through the chassis and
electromagnetic compatibility (EMC)
Table A-2 lists Cisco 12404 Internet router physical specifications.
lists the environmental specifications.
Cisco 12404 Internet Router Installation and Configuration Guide
Product Architecture
1
Table A-3
A-3