Line Cards - Cisco 12404 Installation And Configuration Manual

Line Cards

Line Cards

Cisco 12404 Internet Router Installation and Configuration Guide
1-20
The Cisco 12404 Internet router is shipped with up to three installed line cards
and one RP that provide a variety of network media types. Line card slots and RPs
shipped from the factory are based on your order. Line cards can be installed in
any slot 0 (zero) through 3 in the card cage. Slot zero (0) the second slot from the
bottom of the card cage, is the default RP slot
Figure 1-9 RP Slot Location
3
2
1
0
Fabric Alarm
The line cards interface to each other, and to the RP through the CSF card. Line
cards installed in the Cisco 12404 router are hot swappable) and can be replaced
while the router is On.
For detailed instructions on removing, replacing, and configuring the line cards
supported by the Cisco 12404 Internet router, see the configuration note shipped
with each line card when ordered as an FRU
Chapter 1 Product Overview
(Figure 1-9).
(Figure 1-10).
OL-11636-01