Table of Contents
Advertisement
Available languages
Available languages
Thank you very much for acquiring a STAYER product!
This manual covers models
OLMO G2-400, OLMO G2-400B, OLMO G3-450,
OLMO G3-450B with gasoline engine and one model,
OLMO 22-400, OLMO 22-400B, with an electric engine.
The safety features are very modern and comply with all
international safety standards.
They include hand guards at both handles, a handle safety
device, a chain ratchet, a safety chain and a chain brake.
The chain brake may be actuated manually or it is also
actuated automatically by inertia in case of occurrence of
repulsion.
To ensure
appropriate
performance of your new chain saw and to
safeguard your own safety, it is mandatory
that you carefully read this instruction
manual before using the chain saw.
Take special care in observing all safety
precautions! If you do not observe these
precautions you may suffer severe injuries
or even die!
CONTENTS
..............................................................17
3.1 General Precautions.........................................17
.....................................................................17
5.1 Mounting guide bar and saw chain...............18
5.2 Chain brake..................................................18
5.3 Fuel............................................... ......... ......18
5.4 Chainsaw oil.................................................19
5.5 Refueling......................................................19
5.6 Starting the motor.........................................19
5.7 Starting the gasoline models........................19
6.1 Safety and maintenance schedule...............21
6.2 Cleaning the air filter....................................21
9.1 Technical features........................................22
9.2 EU Declaration of Conformity.......................22
1. Packaging
Your STAYER chain saw will be delivered to you in a
protective cardboard box so as to avoid damages during
transport.
Cardboard is a basic commodity and thus reusable and
suitable for recycling (recycling of used paper).
2. Specific safety instructions
This chain saw has been especially designed
for conserving and taking care of trees.
OLMO G1-250, OLMO G1-250B,
operation
...........................17
......................................17
..........................................21
................................................22
ENGLISH
17
Any work with this chain saw must be carried out by duly
trained persons only.
Observe all specialized literature, and the procedures
and recommendations of the relevant professional
organizations. If you do not do so, you will run the risk
of suffering an accident! We recommend to always use
an elevator platform (platform for collecting fruit,
elevator) to cut in trees. Climbing techniques using
ropes are very dangerous and require special training!
The operator must be trained and be familiar with the
use
of
safety
mountaineering techniques! Always use suitable belts,
ropes and snap hooks when working in trees! Always
use fastening equipment for both yourself and the
and
chain saw!
3. Safety precautions
3.1 General precautions
To ensure correct operation, the used must read this
instruction manual so as to become familiar with the
features of the chain saw. Users who are little informed will
put at risk their own lives and those of others, due to
incorrect handling.
Page
- Borrow this chain saw only to persons with training and
experience in the use of pruning chain saws. Always hand
out the instruction manual.
4. Illustrated description
1. Rear handle
2. Safety locking button (locking of the accelerator)
3. Accelerator lever
4. Hand guard (release for braking the chain)
5. Chain
6. Guide bar
7. Guide bar cover
8. Retaining nuts
9. Chain ratchet
10. Pinion cover
11. Muffler
12. Spark plug
13. Front handle (tubular handle)
14. Starter handle
15. ON/OFF switch (circuit breaker switch)
16. Chain adjusting screw
17. Oil tank lid
18. Fan housing with starter device
19. Fuel tank lid
20. Air filter cover
21. Throttle lever
22. Priming pump
23. Air cover lid
24. Air filter (clean with gasoline and then with compressed air)
25. Monkey key
26. Rat tail file
27. Adjusting screw "H" (high speed)
28. Adjusting screw "L" (low speed)
29. Adjusting screw "T" (idling)
30. Screw driver
5. Startup
Connection to electric power supply
(OLMO 22-400 / OLMO 22-400B)
17
equipment
and
working
and
Hide quick links:
Advertisement
Table of Contents
